淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Harmonic Balance >
Harmonic Balance Troubleshooting Guide >
Inner Iterations Limit Errors

Inner Iterations Limit Errors

When the inner linear solver does not converge within the maximum number of iterations set by the option hb.max_linearsolver_iterations (the default is 100 iterations), Nexxim generates the following warning:

[warning]analysis:hb(warning): Inner iterations limit reached. If analysis fails, try setting hb.max_linearsolver_iterations = 200 or higher

The option hb.max_linearsolver_iterations can be set from within the schematic editor or in the netlist.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com