淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim DC Analysis >
   DC Operating Point Statement in a Netlist       


DC Operating Point Statement in a Netlist

To perform a DC operating point analysis on a Nexxim circuit in the Netlist Editor, the netlist should contain a .DC statement. The syntax is:

.DC

or

.OP

By default, all node voltages and branch currents are output to the results file. For large circuits, significant simulation time can be saved by specifying a set of values to output, rather than the default of calculating variables for every node or current in the circuit.

In the Schematic Editor, use the Edit Output Quantities feature in the Solution Setup dialog box to specify particular outputs.

The netlist can use one or more .PRINT statements to specify the outputs from DC analysis. If you do not add a .PRINT statement, all node voltages and branch currents are output to the results file. The netlist syntax for printing DC analysis results is:

.PRINT DC output1 [output2] ...

See Controlling Nexxim Output for details




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com