淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Using Component Libraries >
Using the Footprint Editor >
   Creating and Editing Footprints >
       Creating a New Footprint           


Creating a New Footprint

To create a new footprint:

 

• 1. Open the Tools > Edit Configured Libraries > Footprints dialog, then click Add Footprint. The Get Name dialog box opens.

2. Type a name for the footprint into the Enter the name for this new Footprint box, and then click OK or press ENTER.

3. Double-click the entry for the new footprint, or click Edit Footprint.

The footprint editor opens.

 

• 1. Open the Tools > Edit Configured Libraries > Footprints dialog, then locate and select an existing footprint on which you would like to base your new footprint.

2. Click Clone Footprint(s). The Get Name dialog box opens.

3. Type a name for the new footprint into the Enter the name for this new Footprint box, and then click OK or press ENTER.

4. Double-click the entry for the new footprint, or click Edit Footprint.

The footprint editor opens.




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com