淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Filter Design Tool >
   Filter Design Wizard >
       Wizard Step 4 Medium Properties >
           Medium Units and Ranges Dialog Box

Medium Units and Ranges Dialog Box

You can change the display units of the filter dimensions by selecting the units under the Units tab. You can also put limitations on the range of dimension fields under the Dimension Ranges tab.

To change the dimension ranges:

1. Bring up the dialog box by clicking Units, Ranges in Medium page in the design wizard or by clicking Units, Ranges in Substrates dialog in design window.

2. Click Dimension Ranges tab.

3. Select type of the field whose range you want to constraint in the list on the left.

4. Type in Min realizable value and Max realizable value fields. You may enter very large or very small values if you don’t know what the realizable range would be.

5. Repeat step 3-4 for all fields you want to control.

6. Click OK.

Next Wizard Step ... Finish

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com