淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Filter Design Tool >
   Filter Design Wizard >
       Wizard Step 1 Properties >
           Changing Units

Changing Units

The display units for an existing filter circuit can be changed using the Change Units dialog box. When a new filter is created using Insert Filter Design, the units are copied from the default units of Designer. The units can be modified independently for each filter design item.

To change display units:

1. There are three ways to bring up the dialog box. If you are in the design wizard, click Change Units in the Properties page or Units, Ranges in Medium Properties page. If you are in the Filter Design Window, click Change Units on the Schematic submenu on the View submenu under Filter at the top of the Designer window.

2. In the dialog box, select a unit type in the Type list.

3. Select a unit listed in the Unit list.

4. Repeat steps 2-3 for units of interest.

5. Click OK.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com