淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

ANSYS Workbench Integration Overview >
Integrating Ansoft Products with ANSYS Workbench14.0 >
Integration with ANSYS 14.0 During Ansoft Product Installation

Integration with ANSYS 14.0 During Ansoft Product Installation

You can choose to integrate Ansoft products with ANSYS 14.0 during installation as follows:

1. If you have not already installed ANSYS 14.0, do so before proceeding. Refer to the ANSYS documentation for instructions on installing the ANSYS 14.0 software.

2. Launch Autorun.exe or Setup.exe for the Ansoft product you wish to install.

3. Proceed through the installation dialogs.

4. When the Integration with ANSYS 14.0 dialog displays, select the Yes radio button to have the installer automatically integrate the Ansoft product with ANSYS 14.0.

Note

If you choose not to integrate the product with ANSYS 14.0 during installation, you can perform this step after installation.

5. Complete the product installation and exit the installer.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com