淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

ANSYS Workbench Integration Overview >
Integrating Ansoft Products with ANSYS Workbench14.0 >
Integration with ANSYS 14.0 after Ansoft Product Installation

Integration with ANSYS 14.0 after Ansoft Product Installation

If you want to integrate an Ansoft product with ANSYS 14.0 after installation, do the following:

1. Select Programs>Ansoft>Ansoft_Product>Modify Integration with ANSYS 14.0 from the Start menu.

2. In the Integration with ANSYS 14.0 dialog box, ensure that the Yes radio button is selected,

then click OK to complete the integration process.

You can confirm that ANSYS 14.0 is “aware” of the Ansoft integrated applications via the ANSYS Workbench Options dialog, which shows the paths to the integrated Ansoft applications.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com