Define Potential Set Item
Simulation:
Sourcesd and Loads  Waveguide Port Define Pins Add/Edit
Within this dialog, you might add a new potential value to an existing
potential set, or edit an existing potential set item. If the set number
has not been used before, a new potential set will be created as well.
Set number
Here, you can enter the number of the potential
set to which the new potential definition belongs.
If the number has not been used before, a new
set will be created.
Potential
Specify whether the potential on the selected
pin is positive or negative.
Location
Specify here the method to define the location
of the potential value. This can be done either by picking
a face or an edge (after pressing the OK button) or just by entering the
location numerically in the two
edit fields below.
X/X X/Z X/Z Location
Enter two valid
to specify the potential's coordinates numerically. These edit fields
are activated if you have chosen to enter the values numerically.
OK
Accepts the input and closes the dialog. If
the Location switch is set to
Picked, a pick modus will be
activated were a metal pin face or edge can be picked.
Preview
If you choose to enter the potential's location
numerically, you can get a preview in the main view by pressing this button.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
Multipin
Port Overview, Waveguide Port,
Potential Set
Definitions
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
