Curve Style
Plot Properties PropertiesCurve Style
In this dialog you can modify the style of the plotted curves. This
includes line style, line thickness and color, as well as the different
marker styles.
Curve
selection frame
Apply changes
to: In this list you can select the curves to which changes should
be applied to. Multiple curves can be selected by holding down the CTRL
- key while clicking on an entry.
Select All:
This button selects all the shown curves.
Line style frame
Auto color:
This radio button sets the color to the default color.
Auto grey:
This radio button resets the color to the default color, but reduced to
the grey scaled color.
User defined
color: This radio button selects the current user defined color.
If you want to change the color, press the '...'-button. This opens the
color selection dialog.
Marker style frame
Auto:
This radio button disables all marks unless the curve has less than 20
data points in the current view.
Additional marks:
Select this radio button to add marks
to the curve. For example, this might be helpful to distinguish curves
that are lying very close to each other or have identical colors.
Marks only:
Use this button to omit the lines between the marks and show only the
marks at each discrete curve value.
No marks:
This radio button disables all marks.
OK
Applies the current settings to the selected
curves and closes the dialog box.
Apply
Applies the current settings to the selected
curves without closing the dialog box.
Defaults
Resets the selected curves to default values.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
Please note that the features of this dialog
are not available if the storage mode for 1D results is set to "ASCII".
This setting can be found under
OptionsPreferencesGeneral settings.
See also
Smith Chart and Polar Plot Properties, 1D
Plot Properties, 1D
Plot Overview
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
