Monitor on Solids or Volumes
Monitors  Monitor on Entity Monitor on Volume
This dialog box gives you the opportunity to define monitors for transient
simulations. You might need these monitors to obtain additional information
on the electromagnetic field distribution inside your structure. After
a calculation, you can observe your monitors by selecting them in the
.
Name and type definition
Name:
Displays the name for the monitor either as a user input or automatically
generated.
Automatic labeling:
This check button enables or disables the automatic labeling for the defined
monitor. The automatically generated label consists of the
selected monitor type, including the specified solid settings.
Type:
This drop-down list offers a variety of monitors. The currently available
monitor types allow the observation of Energy,
Co-energy, Coil Voltages, Force and Torque and Ohmic
Losses.
Monitor settings
Everywhere/all
domains: Evaluation of the specified function (monitor type) in
the entire computation domain.
Select subvolume:
Enables a drop-down list from which a solid, a coil or a solid wire can
be chosen.
Please note
that Coil Voltages can be evaluated
only on coils and Forces can
be evaluated only on non-sheet and non-hybrid solids as well as on coils
and solid wires. The options "background"
or "all domains" are
not available for these monitor types.
Extend to touching
shapes: This check box is available only for the Forces
and Torque monitor type. The force computation method requires
objects which are surrounded completely by the background or by objects
that are equivalent to the background. An object is considered as equivalent
to the background if
it
has the same material coefficients (e.g. for electrostatics the same permittivity,
or for magnetostatics the same permeability) and it
is not occupied by a source.
When the checkbox is activated all shapes connected
to the selected solid or coil will be collected into one group and the
force on this group will be computed. Otherwise the force will be computed
only on the specified object, but a warning will be printed if shapes
are detected which are not entirely embedded in background or equivalent
material.
Please note that the background and equivalent
objects are ignored by the force computation method, but
the selected object will never be ignored.
Please see Force
and Torque Calculation for further information.
Torque normal
/ Torque origin: Available only for the Forces
and Torque monitor type. In these 6 edit fields the position and
orientation of the torque axis can be specified.
OK
Accepts your settings and leaves the dialog
box.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
LF
Time Domain Solver, Solver
Overview, Modeler
View
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
