Monitor on Edges or Curves
Monitors  Monitor on Entity Monitor on Edge
This dialog box gives you the opportunity to define monitors for transient
simulations. You might need these monitors to obtain additional information
on the electromagnetic field distribution inside your structure. After
a calculation, you can observe your monitors by selecting them in the
.
Name and type definition
Name:
Displays the name for the monitor either as a user input or automatically
generated.
Automatic labeling:
This check button enables or disables the automatic labeling for the defined
monitor. The automatically generated label consists of the
selected monitor type, including an incremented number.
Type:
This drop-down list offers a selection of monitors. The currently available
monitor type allows voltage or
source current observations.
The latter is particularly meaningful to observe the current flowing along
a voltage path.
Edge or Curve Selection
Invert orientation:
Each connected set of edges or curves has an orientation which results
from their definition and which in general depends on the order of picking.
This orientation is indicated by arrows in the monitor preview (select
the monitor in the ).
It will influence the solver result computed for this monitor. Activate
this checkbox to invert the orientation.
Use picked
edges: This option is available only when edges were picked before
the dialog box is opened to define the monitor. Please note that only
edges are considered which belong to a solid (no Edges
from Coordinates).
Use curves:
This option is available only when curves were defined before the dialog
box is opened to define the monitor. When you push the button List
Curves you can hide or show a list of all defined curve items from
which you can select the desired items via enabling or disabling the desired
check boxes.
OK
Accepts your settings and leaves the dialog
box.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
LF
Time Domain Solver, Solver
Overview, Modeler
View
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
