3D Field Monitor
Monitors Field Monitor
This dialog box gives you the opportunity to define field monitors
for transient simulations. You might need these monitors to obtain additional
information on the electromagnetic field distribution inside your structure.
After a calculation, you can observe your field monitors by selecting
them in the .
Name and type definition
Name:
Displays the name for the field monitor either as a user input or automatically
generated.
Automatic labeling:
This check button enables or disables the automatic labeling for the defined
field monitor. The automatically generated label consists of the
selected monitor type, including either the specified frequency or time
sample settings of the frequency or time monitor, respectively.
Type:
This drop-down list offers a variety of field monitors. The currently
available monitor types allow B-Field,
H-Field, E-Field, J-Field,
Material, Temperature
and Heat Flow-Density observations.
Monitor settings
The time monitor records the chosen field type
at several equidistant time samples.
Start time:
Enter here the start time for the time monitoring.
Step width:
Enter here the desired step width for the time monitoring. Together with
start and end time this value determines the full number of recorded time
samples. Note that time monitors possibly need a great amount of disk
memory if the step width is chosen too small.
End time:
Activating this check box offers the possibility to define a specific
end time for the recording. If it is switched off, the recording will
continue up to the end of the calculation.
OK
Accepts your settings and leaves the dialog
box.
Cancel
Closes this dialog box without performing any
further action.
Help
Shows this help text.
See also
Solver
Overview, Modeler
View
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
