3D Scalar Plot Special Settings
Properties  Specials
Scaling frame
Scale components
to vector maximum: Check this if you want all components (x/y/z)
scaled to the vector maximum. Thus you can compare different components.
If not checked, the components are scaled to their own maximum.
Clamp to range:
Check this if you want to scale your plot to a range defined below in
the Min / Max
input fields. This is useful to compare plots with different maximum values.
Values outside the range are clamped (plotted as equal) to the maximum
/ minimum.
Please note:
Scaling and logscale is disabled if clamp
to range is active.
Anchor
point: Defines a suitable anchor point for a logarithmic
color ramp according to different strategies. Select "custom"
to set a value manually if the relevant range of interest can not be determined
automatically (e.g. potential or temperature plots).
Anchor
value: Current value
of the active anchor point.
Plot quality slider
Plot data is represented by triangles. This
slider enables you to influence the number of triangles used for your
plot. A fine plot quality will result in a longer plot generation time
and thus also in slower movies.
Show surface mesh
Visualizes the triangular mesh of a 3D surface
plot.
Note: This option is only available with tetrahedral
meshes.
OK
Takes the current settings and closes the dialog
box.
Cancel
Closes the dialog box without performing any
further action.
Help
Shows this help text.
See also
2D/3D
Plot Overview, 3D Scalar Plot
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
