Define Cutting plane by partition line Mode
 View:
Sectional View Cutting Plane by Partition Line
In this mode, you may interactively define a straight line that will
then be extruded perpendicular to the screen in order to define the new
location and orientation of the cutting plane.
Creation steps
When you first enter the mode, you will be asked
to double-click to mark the start point of the line. In the next step,
you may specify the endpoint by, once again, double-clicking at a location
on the screen. During this operation, a rubber-band line will be displayed
indicating the current size of the line. Finally the cutting plane will
be activated and oriented according to the selected line.
Cancel interactive mode
You may cancel this interactive mode at any
time by pressing the ESC key.
Undo last double-click
You may go back to the last step by pressing
the BACKSPACE key. Pressing this key in the interactive mode will undo
the last double-click.
See also
View
Changing Options, Cutting
Plane.
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
