|
Chamfer Curve Mode
Curves Curve ToolsChamfer
In this mode, you may interactively define a point on a curve to which
a chamfer will be applied.
When you enter the mode, all pickable points on the selected curve
will be highlighted. You may now double-click on one of these points to
specify the location to which the chamfer will be applied.
After the point has been selected, a chamfer dialog box appears where
you may specify a
and a width for the chamfer.
You may terminate the mode at any time by pressing the ESC key.
See also
Standard
View Changing Options, Chamfer
Dialog Box, Curve
Creation
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
|
淘宝官方店 
