Define Current Path From Curve

Simulation: Sources and Loads Path Sources Current Path

Current path sources are infinite thin wires  which feed the calculation domain with a given current. For more general information refer to the path source overview page.

Name

Defines the name of the current path. Each current path must have a unique name.

Current

Specify the current for the current path. For frequency domain calculations, it can be specified in the LF Frequency Domain Solver - Special Settings, whether this current value is to be interpreted as peak or RMS value. With the default settings, the prescribed current is interpreted as RMS value, i.e. as the root-mean-square values.

Phase

Specify phase of the current path in degrees. Please note that the current phase only affects the simulation for frequency domain problems.

OK

Accepts the changes and closes the dialog.

Cancel

Closes this dialog box without performing any further action.

Help

Shows this help text.

See also

Path Source Overview, Magnetostatic Sources Define Coil Segment