Loft Curves

Modeling: Curves Curve ToolsLoft Curves

In this dialog box you can create a solid shape by lofting between previously defined curves. A loft shape is a solid mainly defined by a free form surface which passes through all specified curve profiles.

Optionally a path curve can be specified which defines the tangency of the free form surface where it passes the profile curves.

Note: All profile curves and the path curve must be located on different curves.

After selecting the corresponding ribbon control an interactive mode will be entered in which the profile curves (at least two) need to be selected first before the path curve is optionally selected afterwards.

As soon as the new shape is created it will appear in the main plot window and on the navigation tree.

The picture below shows the shape created by lofting two elliptical curves with and without a path curve:

 

Loft Curve without Path

 

Loft Curve with Path

 

 

 

image\curveloftdialog.gif

 

image\curveloftpathdialog.gif

 

Name

Specify the unique name for the solid.

Make solid shape

Check this option to create a solid shape by covering the two ends of the lofted free form surface. Otherwise the resulting shape is a single free face only.

Minimize twist

Check this option to automatically minimize the twisting of the resulting shape. If this option is checked, the corresponding points on circles and ellipses will be adjusted such that the generated free form surface is not twisted at all. This option is only useful for lofts between circles and ellipses.

Component

Choose a new component from the select list. You can also create a new component by typing the name of the new component.

Material

Select the material to which this shape will be assigned from the list of previously defined materials or create a new material by selecting [New Material...]. You can also load a material from the material library by selecting [Load from Material Library...].

OK

Press this button to finally create the shape.

Preview

Press this button to create a preview image of the shape. This option is very useful to check the settings before you actually create the shape.

Cancel

Closes this dialog box without performing any further action.

Help

Shows this help text.

See also

Curve Creation, Shape Creation, Cover Planar Curve, Extrude Planar Curve, Sweep Curve Along Path, Trace From Curve, Loft Curve Mode