首页 >> CST教程 >> CST2013在线帮助系统 |
ADS Co-SimulationPost Processing: Exchange Import/Export ADS Co-SimulationThe "ADS Co-Simulation" option enables ADS庐 to launch CST MICROWAVE STUDIO to automatically calculate required data. All information is stored together with the CST MICROWAVE STUDIO model to avoid unnecessary repetitions of lengthy EM simulations. Preconditions to use ADS Co-Simulation For a detailed description of how ADS庐 and CST MICROWAVE STUDIO may work together please read "Agilent ADS Co-Simulation Overview". If you want to use an ADS庐 Design Kit with CST MICROWAVE STUDIO version 2008 that has been created by CST MICROWAVE STUDIO version 2006b or prior some special care needs to be taken. See "ADS Design Kit compatibility issues" for more details. Enable ADS Co-Simulation Activate this check button to enable the ADS庐 Co-Simulation. Whenever the calculation of new S-parameter data is required, the co-simulation interface will then automatically launch CST MICROWAVE STUDIO. Use interpolation This option specifies whether the S-parameter data may be interpolated or not. If this option is switched off, the S-parameters will be directly calculated for every requested parameter combination. If the interpolation feature is activated, the interpolation is done on a regular grid of so called anchor points, which can be independently controlled for each parameter in the Parameters list box. Description Specify here a description text that will later be shown in the ADS庐 library browser. Solver type Select here the solver (Transient or Frequency domain) that will be used for the calculation if CST MICROWAVE STUDIO is automatically launched. Parameters This list shows all currently defined parameters that can be used for the co-simulation. If a parameter depends on another parameter (e.g., in the form of an expression), its value cannot be set directly. Therefore, dependent parameters will not be shown in this list. A certain parameter, determined by its specific Name, can be controlled from within ADS庐 if its Use option is checked. This selection allows you to hide parameters from being visible in the ADS庐 component options. Furthermore, each parameter needs to have a Type assigned to it to properly handle potentially different unit settings in CST MICROWAVE STUDIO and ADS庐. Please ensure that you specify the correct type according to the physical meaning of the parameter, e.g., type Length for a radius parameter. The following types are supported:
If the Use interpolation option is activated, the Nominal Value and the Step Size defines an equidistant grid of "anchor points" for the interpolation of S-parameter data. The Nominal Value defines a reference point from which the grid is spanned using the Step Size value as distance between two anchor points. These values can be independently specified for each parameter. Whenever a new data point is requested, the two closest neighboring anchor points are determined and their contributions to the requested sample are calculated. Based on this information, the requested S-parameters can then be obtained by linear interpolation. OK Pressing the OK button closes the dialog box and creates or updates the ADS庐 Design Kit component. Please make sure to restart ADS庐 to update these changes. Cancel Closes this dialog box without saving the current settings. Help Shows this help text. See also Export Agilent ADS Component (static link) , Agilent ADS庐 Co-Simulation Overview, ADS Design Kit compatibility issues HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |