Local Coordinate System Properties
WCS Local WCS Local Coordinate System Properties...
In this dialog box you may specify the parameters (origin and orientation)
of the local .
Some more measurements (distance, angle) are also shown
Origin: X/Y/Z
Specify valid
for the origin of the local coordinate system in fixed global coordinates.
Normal: X/Y/Z
Specify valid
for the components of a vector in global coordinates. The w-Axis of the
local coordinate system will be aligned parallel to this vector.
U-Vector: X/Y/Z
Specify valid
for the components of a vector in global coordinates. In combination with
the alignment of the w-Axis (Normal)
you may specify the direction into which the u-Axis of the local coordinate
system will be oriented. Please note that the Normal
and U-Vector settings must not
describe parallel vectors.
Distance local to global origin
This text field shows you the distance of the
local origin to the global origin.
Angle between X and U / Y and V / Z and W axes
These three text fields indicate the angle in
degrees between the axes of the local coordinate system to the corresponding
axes of the global coordinate system.
OK
Press this button to store the settings of the
local coordinate system. When the local coordinate system is active, the
orientation of the drawing plane will be updated immediately.
Cancel
Closes this dialog box without performing any
further action.
Preview
Shows/updates the preview of the local coordinate
system. Also updates the distance and angle information.
Help
Shows this help text.
See also
Coordinate
Systems, Store Current
WCS, Transform
Local Coordinate System, Align
WCS, Properties of stored WCS
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|
淘宝官方店 
