2D Scalar Plot Special Settings
Properties Specials
Scaling frame
Scale components
to vector maximum: Check this if you want all components (x/y/z)
scaled to the vector maximum. Thus you can compare different components.
If not checked, the components are scaled to their own maximum.
Clamp to range:
Check this if you want to scale your plot to a range given below. This
is useful to compare plots with different maximum values. Values outside
the range are clamped (plotted as equal) to the maximum / minimum.
Please note:
Scaling and logscale is disabled if clamp
to range is active.
dB
scaling: Check here to get a log. dB plot.
3D Max = 0dB/ 2D Max
= 0dB/ dB[unit]/ 鈥? Set here the desired logarithmic unit; i.e.,if
you set the "3D Max = 0dB"("2D Max = 0dB")
3D(2D) maximum is scaled to 0 dB and if you set dBm[unit],
you will get 0 dBm[unit] for a field of 1e-3[unit].
Range
[dB]: Sets the range in dB of the plot color ramp.
Anchor
point: Defines a suitable anchor point for a logarithmic
color ramp according to different strategies. Select "custom"
to set a value manually if the relevant range of interest can not be determined
automatically (e.g. potential or temperature plots).
Anchor
value: Current value
of the active anchor point.
Plot quality
Plot data is represented by triangles. This
slider enables you to influence the number of triangles used for your
plot. A fine plot quality will result in a longer plot generation time
and thus also in slower movies.
Note: This option is only available with hexahedral
meshes. With tetrahedral meshes the 2D mesh quality will be directly influenced
by the quality of the 3D mesh.
Adaptive plot refinement: This
option activates the automatic refinement of the plot quality for hexahedral
meshes. If the density of the hexahedral mesh is higher than the density
of the mesh used to create the scalar plot then the latter will adapt
itself to concur with the higher quality of the hexahedral mesh.
Please note:
This option is very intensive on memory. So with extremely fine hexahedral
meshes or very low memory resources it might be disabled.
Transparency
This slider allows you to set the transparency
for drawing contour plots or carpet plots. A transparent visualization
of field data may be useful in order to get an idea of the correlation
of the fields on the visualization plane with the structure underneath.
OK
Takes the current settings and closes the dialog
box.
Cancel
Closes the dialog box without performing any
further action.
Help
Shows this help text.
See also
2D/3D
Plot Overview, 2D Scalar Plot
![Ansoft Designer 教程](/images/Designer/VNA_AN.png)
HFSS视频教程
ADS视频教程
CST视频教程
Ansoft Designer 中文教程
|