淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

CST视频教程推荐   CST微波工作室入门与应用详解   |  CST使用操作基础

          首页 >> CST教程 >> CST2013在线帮助系统

Sweep Curve Along Path Mode

Modeling: CurvesCurve ToolsSweep Curve

In this mode, you may interactively select a (profile) curve that will then be swept along another selected (path) curve to obtain a solid shape. Please note that the profile and the path must belong to different curves. To move items from one curve onto another, you may use the Curve Change Curve operation.

When you first enter the mode, you will be asked to double-click on a curve to select the profile curve for sweeping. By moving the mouse across the screen, all pickable curves at the mouse鈥檚 location will automatically be highlighted. As soon as a curve is highlighted, you may double-click on it to make your selection.

After the profile curve has been selected, the path curve needs to be selected in the same manner.

You may change the view at any time by using the standard view changing options.

After both curves have been selected, a sweep curve dialog box appears where you may specify a name , a component and a material for the new shape.

You may terminate the mode at any time by pressing the ESC key.

See also

Standard View Changing Options, Sweep Curve Dialog Box, Change Curve, Curve Creation




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com