首页 >> CST教程 >> CST2013在线帮助系统 |
Align ModeModeling: ToolsAlignUse this mode to align a selected model with the current model. You may change the view at any time by using the standard view changing options. First select the objects you want to align and then follow the steps described below.
Please note: This mode is automatically activated when pasting a copied model or importing a sub-project.
Alignment steps When you first enter the mode, you will be asked to double-click to mark the reference face on the objects to align. After the first face has been selected, the next step is to choose the reference face of the current model. The selected model will be transformed in a way that these two faces are touching each other. Press ENTER to apply the current transformation or proceed with the next step to twist the transformed model. For the rotation step you may push TAB (multiple times) to rotate the selection by multiples of 90掳 and hit RETURN to finish. As an alternative use the pick tools. Use the point pick tools to get a baseline between this point and the rotation center or use the edge pick tools to define the direction. Then you pick a second point or edge on the current model to define the twist angle between the two models. Note: In the third and forth step you may maximize the amount of pickable shapes by pressing "+", return to the default set by "-". Undo last step You may go back to the last step by pressing the BACKSPACE key. See also Working Plane Properties, Standard view changing options, Snap grid, Brick dialog box, Coordinate dialog box, Point pick tool, Material Parameters, Copy and Paste Solids, Import Sub-Project HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系:mweda@163.com |