Update File References

Home:  EditProject Dependencies Update File References

Home: Simulation Update

If a file belongs to a simulated or measured block in your design and has been modified in external software, you can update the block within this dialog box.

All modified project files are displayed in a file list where you can perform a selection of an arbitrary subset of all files. During the following update of the results, only the modification of the selected files is considered.

For the selected blocks, additional internal ports are established and the frequency range is updated, but no recalculation of the results is performed.

This dialog box is also opened after Home:  Simulation-Update if there are still some blocks outdated.

File list

Displays all files that connected, measured or simulated blocks are associated with and that have been modified in external software. A check box attached to each file indicates whether its modification will be considered during the following update.

All

Selects all items of the file list.

None

Deselects all items of the file list.

OK

Leaves the dialog box and updates the selected files before the update of the results is performed.

Cancel

Closes this dialog box without performing any further action. The update of the results is cancelled.

Help

Shows this help text.

See also

Performing Settings and Calculations