淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

System Simulator >
Frequency Domain Analyses >
Multi-Tone Frequency Domain Analysis >
Multi-Tone Frequency Domain Measurements

Multi-Tone Frequency Domain Measurements

There are two kinds of measurements available with the multi-tone domain analysis. One measurement is the output power (Pout) at all output external ports. The other measurement may be obtained by the use of electrical probes: Voltage Probes (VPs) and Power Probes (PPs). These two electrical probes may be placed anywhere inside a nonlinear electrical system (prior to running the analysis). Each probe must be given a label or a name. Once the analysis is completed, these probes will be available in the Quantity field. The voltage and power spectrums and steady state time domain responses at the points where these probes are placed can be viewed. This will help you identify the effects the individual components in the system have on the overall IMD results.

Note

Voltage Probes and Power Probes are available in Multi-tone frequency domain measurements.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com