淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Script Guide >
Designer and VBScript >
Recording a Script

Recording a Script

After you begin to record a script, each subsequent interface action you take is recorded and saved to a text file or project folder you have designated — i.e., each interface command is comprised of one or more associated script commands, and each action is recorded and saved to a single script. The recorded script is saved in VBScript format (.vbs).

To Record a Script to a File:

1. On the Tools menu, click Record Script to File.

The Save As dialog box appears.

2. Use the file browser to locate and double-click the folder where you wish to save the script,
such as C:\Program Files\Ansoft\Designer\Scripts.

3. Type the name of the script in the File name text box and then click Save.

4. Perform the steps you wish to record.

5. When you have finished, click Tools > Stop Script Recording.

The recorded script is then saved to filename.vbs in the folder you designated.

To Record a Script to a Project:

1. On the Tools menu, click Record Script to Project.

The Save Script to Project dialog box appears.

2. Type the name of the script in the text box and then click OK.

3. Perform the steps you wish to record.

4. When you have finished, click Tools > Stop Script Recording.

The recorded script is then saved to scriptname.vbs in the Scripts library and can be accessed by expanding the definitions/Scripts folder in the Project tree.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com