• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Script Guide >
Optimetrics Module Script Commands >
   Optimetrics Module Conventions       

Optimetrics Module Conventions

Following are the conventions for the Optimetrics module:

                          <VarName>

                           Type: <string>

                           Name of a variable.

                          <VarValue>

                           Type: <string>

                           Value with unit (i.e., <value>, but cannot be an expression).

                          <StartV>

                           Type: <VarValue>

                           The starting value of a variable.

                          <StopV>

                           Type: <VarValue>

                           The stopping value of a variable.

                          <MinV>

                           Type: <VarValue>

                           The minimum value of a variable.

                          <MaxV>

                           Type: <VarValue>

                           The maximum value of a variable.

                          <IncludeVar>

                           Type: <bool>

                          Specifies whether the variable is included in the analysis.

                          <StartingPoint>

                           Array(“NAME:StartingPoint”, “<VarName>:=",

                          <VarValue>, .... “<VarName>:=”, <VarValue>)

                          <SaveField>

                           Type: <bool>

                          Specifies whether Designer will remove the non-nominal field solution.

                          <MaxIter>

                           Type: <int>

                           Maximum number of iterations allowed in an analysis.

                          <PriorSetup>

                           Type: <string>

                           The name of the embedded parametric setup.

                          <Precede>

                           Type: <bool>

                           If true, the embedded parametric setup will be solved before the

                          analysis begins.

                           If false, the embedded parametric setup will be solved during each

                          iteration of the analysis.

                          <Constraint>

                          Array(“NAME:LCS”,

                          “lc:=”, Array(“<VarName>:=”,

                          <Coeff>, …”<VarName>:=”, <Coeff>, “rel:=”, <Cond>, “rhs:=”, <Rhs>), ...

                          “lc:=”, Array(“<VarName>:=”, <Coeff>, ...”

                          <VarName>:=”, <Coeff>, “rel:=”, <Cond>, “rhs:=”,

                          <Rhs>))

                          <Coeff>

                           Type: <double>

                           Coefficient for a variable in the linear constraint.

                           <Cond>

                           Type: <string>

                           Inequality condition.

                           <Rhs>

                           Type: <double>

                           Inequality value.

                          <OptiGoalSpec>

                           “Solution:=”, <Soln>, “Calculation:=”, <Calc>,

                          “Context:=, <Geometry>

                           Array(“NAME:Ranges”,

                          “Range:”, Array(“Var:=”,

                          <VarName>, “Type:=”, <RangeType>, “Start:=”,

                          <StartV>, “Stop:=”, <StopV>), ...

                          “Range:”, Array(“Var:=”, <VarName>, “Type:=”,

                          <RangeType>, “Start:=”, <StartV>, “Stop:=”,

                          <StopV>))

                          <Soln>

                           Type: <string>

                           Name of the Designer solution.

                           <Calc>

                           Type: <string>

                          An expression that is composed of a basic solution quantity and an

                          output variable.

                           <Geometry>

                           Type: <string>

                           Name of geometry needed in the evaluation of <Calc>.

                           <RangeType>

                           Type: <string>

                           if “r”, start and stop values specify a range for the variable.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com