淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Script Guide >
Reporter Editor Script Commands >
GetDisplayType

GetDisplayType

Use: Get the display type of a report.

Command: None

Syntax: GetDisplayType “<reportName>”

Return Value: Report <displaytype> of a report.

<DisplayType>

Type: <string>

If ReportType is "Modal S Parameters", "Terminal S Parameters", or "Eigenmode Parameters", then returns one of the following:

"Rectangular Plot", "Polar Plot", "Radiation Pattern",

"Smith Chart", "Data Table", "3D Rectangular Plot", or "3D Polar Plot".

If < ReportType> is "Fields", then returns one of the following:

"Rectangular Plot", "Polar Plot", "Radiation Pattern",

"Data Table", or "3D Rectangular Plot".

If < ReportType> is "Far Fields" or "Near Fields", then returns one of the following:

"Rectangular Plot", "Radiation Pattern", "Data Table",

"3D Rectangular Plot", or "3D Polar Plot"

If <ReportType> is “Emission Test”, then returns one of the following:

“Rectangular Plot” or “Data Table”

Parameters: <ReportName>

Type: <string>

Report name.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程

　


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com