淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

Ansoft Designer / Ansys Designer 在线帮助文档：

Script Guide >
Schematic Scripting >
Create Method List

Create Method List

This section lists the scripts that are available in the Schematic scripting interface to create and change data.

Script Position Parameters

In Create Method scripts, X and Y position parameters are expressed in meters.

• If your layout grid units are metric, you may enter the X and Y positions directly into a script as parameters.

• If your layout grid is expressed in mils, you must first convert the component's positional coordinates to meters.

To convert an X or Y position to meters based on the minor grid size:

X or Y position in meters = desired_position x ( 0.00254 / minor_grid_size )

where desired_position and minor_grid_size have the same units. For example, to position an object at 500mm with a minor grid size of 20mm:

X or Y position in meters = 500 x ( 0.00254 / 20 )


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com