淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Generating Reports and Postprocessing >
Working with Traces >
Discarding Report Values Below a Specified Threshold

Discarding Report Values Below a Specified Threshold

To prevent real small numbers from skewing a plot, you can discard small values (below a specifiable threshold).

1. Double-click on the X or Y axis of interest on an open plot display.

This opens the Properties window for the Axis

2. Under the Axis tab, use the scroll bar to find the Specify Discard Values property.

3. Click the checkbox to enable the property.

4. Enter a value in the Discard Below field. Units specified elsewhere in the Axis property are applied to this value. The Discard Below text box is inactive if the Specify Discard Values checkbox is not enabled.

5. Click OK to apply the Discard Values to the report.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com