淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Generating Reports and Postprocessing >
Working with Traces >
Copy and Paste of Report and Trace Data

Copy and Paste of Report and Trace Data

You can copy and paste report and individual trace data within a single design or across designs. The report and trace definitions and all underlying data within the report or trace are copied and pasted to the target design or report.

To copy all data from a report:

Right click on the report name in the project tree and select Copy Data, or use the menu bar Edit > Copy Data, or right click within a plot to display a shortcut menu with Copy Data.

To paste copied report data:

Right click on Results in the project tree of the target design and select Paste.

To copy data from an individual trace(s) in a report:

Right click on the trace or traces under a report name in the project tree and select Copy Data.

To paste copied trace data:

Right click on the report in the target design to which you would like to copy the trace data and select Paste.

Note

If you copy and paste report or trace data which contains the same name definition as a report or trace in the target design then an incremented number will be appended to the pasted name

Working with Traces

Editing the Display Properties of Traces

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com