• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Generating Reports and Postprocessing >
   Specifying Output Variables >
       Adding a New Output Variable           

Adding a New Output Variable

To add an output variable:

1. Click Product Menu > Results > Output Variables or, in the Project tree, right-click on Results and select Output Variables from the short-cut menu.

The Output Variables window appears. Variables defined using the Product Menu > Results > Output Variables command appear in the list at the top of the window.

2. In the Output Variables section, enter a name for the new variable in the Name box.

3. To enter an expression, do one or both of the following:

a. Type part or all of the expression directly in the Expression area. Valid functions appear in blue. Invalid functions appear in red.

b. Insert part or all of the expression using the options in the Calculation and Function sections.

4. Click Add to add the new variable to the list.

5. Repeat steps 2 through 5 to add additional variables.

6. When you are finished adding output variables, click Done to close the Output Variables window.

Related Topics

Deleting Output Variables

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com