• 首页
• HFSS教程
• ADS教程
• CST教程
• 射频工程师培训
• 微波仪器操作培训
• 天线设计培训
• 射频专业基础课

Ansoft Designer / Ansys Designer 在线帮助文档：

Generating Reports and Postprocessing >
   Specifying Output Variables >
       Building an Expression Using Existing Quantities           

Building an Expression Using Existing Quantities

When you are entering an expression for a new output variable, you can insert part or all of the expression using the options in the Calculation and Function sections of the Output Variables window.

To add an input variable by inserting part or all of the expression:

1. Click Product Menu > Results > Output Variables or, in the Project Tree, right-click on Results and select Output Variables from the short-cut menu.

The Output Variables window appears.

2. In the Output Variables section, enter a name for the new variable in the Name box.

3. To insert a quantity:

a. From the Report Type pull-down list, select the type of report from which you want to select the quantity.

b. From the Solution pull-down list, select the solution from which you want to select the quantity.

c. From the Category list, select the type of quantity you want to enter.

d. From the Quantity list, select the quantity or the geometry.

e. From the Function list, select a ready-made function (this option is the same as inserting the function from the Function section).

f. If applicable, from the Domain list, select the solution domain.

g. Click Insert Into Expression.

The selected quantity is entered into the Expression area of the Output Variables section.

4. To insert a function:

a. In the Function section, select a ready-made function from the pull-down list.

b. Click Insert Function into Expression.

The function appears in the Expression area of the Output Variables section.

5. When you are finished defining the variable in the Expression area, click Add to add the new variable to the list.

6. Repeat steps 2 through 6 to add additional variables.

7. When you are finished adding output variables, click Done to close the Output Variables window.

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com