淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Working with Designer Projects >
Referencing External Files from the Schematic Editor >
Include Files in Nexxim Netlists

Include Files in Nexxim Netlists

The .INCLUDE statement identifies a file that is to be inserted in its entirety into the netlist at the point of the .INCLUDE statement:

.INCLUDE file_reference

Include file pathnames, and all pathnames used in Designer, must refer to subdirectories using a syntax that is compatible with the platform operating system. Some operating systems use a forward slash (/) as a pathname separator, while others use a backslash (\). The example below uses a backslash, which is the valid separator used in Windows™ systems. Designer ensures the consistent and compatible use of slash designators in netlist file paths for each of the following platforms: Windows, UNIX™, and Linux™. For more information see File References.

For example:

.INCLUDE 'diode_model_statements'

.INCLUDE 'models\diode_models'

.INCLUDE 'C:\simulator\model_statements\diode_model_statements'

The complete contents of the include file are added to the calling netlist. The included file can contain further .INCLUDE files to be processed.

Note

None of the included files can refer to any other file in the sequence of included files. A loop of included files causes an unrecoverable error condition. However, Nexxim cannot detect this error in advance, so no warning message is given.

See Nexxim Netlist Format for details on this file type.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com