淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Adding a Solution Setup >
Disable an Analysis Setup

Disable an Analysis Setup

You can enable or disable a setup definition. Disabled setups will have a “greyed-out” setup icon, and will not allow analysis of any sweeps until enabled. To disable an analysis setup definition without deleting it:

1. Expand the tree hierarchy under the Analysis icon in the project tree.

2. Right-click on the icon for the setup definition.

3. In the shortcut menu that appears, select Disable Setup Analysis. (To reactivate the sweep, open the shortcut menu again and select Enable Setup Analysis.)

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com