淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Adding a Solution Setup >
Disable a Frequency Sweep

Disable a Frequency Sweep

You can enable or disable a sweep definition. Disabled sweeps will have an “empty graph” icon, and will not be analyzed until enabled. To disable a sweep definition without deleting it:

1. Expand the tree hierarchy under the Analysis icon in the project tree.

2. Expand the tree hierarchy under the icon for the analysis setup that includes the sweep.

3. Right-click on the icon for the sweep definition. In the shortcut menu that appears, select Disable Sweep Analysis. (To reactivate the sweep, open the shortcut menu again and select Enable Sweep Analysis.)

You can also disable a sweep by selecting Properties from the shortcut menu to open the Edit Properties window. In the upper-right corner of the Edit Properties window, uncheck the Enabled box. Then click OK to apply the change. (To reactivate the sweep, simply re-open the Edit Properties window and check the Enabled box. Then click OK.)

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com