淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Setting Up Excitations >
De-embedding S-Matrices

De-embedding S-Matrices

To compute a de-embedded or phase-rotated S-matrix:

1. Double-click the port in the project tree that you want to de-embed.

The Edge Port Definition dialog box appears.

2. Select Post Process Port.

3. Enter the length of the transmission line to be added in the Deembed field.

4. Click OK to assign that length to the selected port.

The 2D Reporter automatically updates its reports to reflect the de-embedded S-matrix.

Note

Renormalization is ignored if it is set to zero, but de-embedding is still honored. The following warning message is produced for all ports with a zero post-processing renormalization impedance: Zero impedance on port '<arg1>' is ignored; renormalization will by skipped for this port.

Related Topics

De-embedded S-Matrices

Using the De-embedding Wizard

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com