淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

HFSS and Planar EM Simulators >
Running Simulations >
   Changing a Solution Priority       


Changing a Solution Priority

You can reduce the priority of Ansoft Designer simulations so that system resources are allocated to other computer processes before the solver. If you reduce the priority of Ansoft Designer simulations, your other software tools will respond as they normally would, but Ansoft Designer simulations may take longer.

Note

The Windows Task Manager does not indicate a reduced priority for the Ansoft Designer solver. It only lists the priority of the engine manager, which appears normal, not the actual engine. The actual engine is in a separate thread, whose priority is not visible in the Windows Task Manager.

 

To change the priority of simulations for the system’s resources:

1. While a solution is running, right-click the Progress window, and click Change Priority on the shortcut menu.

• Alternatively, click the Tools > Options > EM Design Options to open the EM Design Options dialog box, and click the Solver Selection tab.

2. From the Change Priority menu (or the Default Process Priority pull-down menu), select one of the following priorities:

[spacer]

Lowest Priority

 

Below Normal

 

Normal

(default)

Above Normal

 

Highest

 

3. Click OK.

 

Related Topics

Monitoring Queued Simulations

 



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com