淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up a Parametric Analysis >
Specifying the Solution Quantity to Evaluate

Specifying the Solution Quantity to Evaluate

When you add a parametric setup, you can identify one or more solution quantities to be presented in the Post Analysis Display dialog box. The solution quantities are specified by mathematical expressions that are composed of basic quantities, such as S-parameters, and output variables. When you view the results, Designer extracts the solution quantities and lists them in the results table.

1. In the Setup Sweep Analysis dialog box, click the Calculations tab.

This displays a table that will show Solutions and associated Calculations. Below the table, are control buttons to Setup Calculations and Delete.

2. Click Setup Calculations.

This displays the Add/Edit Calculation dialog. The dialog contains a panes to set the Context, the Trace tab for the Calculation Expression, and the Families tab for the Calculation Range.

Follow the procedure to Setup Calculations for Optimetrics.

3. Click Add Calculation to add the expression in the Add/Edit Calculation dialog Value field to the Calculations tab of the Setup Sweep Analysis dialog.

4. Click Done to close the Add/Edit Calculation dialog.

The topics in this section include:

Setup Calculations for Optimetrics

Specifying a Solution Quantity Calculation Range

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com