淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
   Setting up a Parametric Analysis >
       Specifying the Solution Quantity to Evaluate >
           Setup Calculations for Optimetrics

Setup Calculations for Optimetrics

The Setup dialogs for each of the Optimetrics types include a Setup Calculations button. Clicking this displays the Add/Edit Calculation dialog. The dialog contains distinct panes to set the Context, the Calculation Expression, and the Calculation Range.

The Context pane contains fields for the Report Type to use, the Solution, and depending on the Report Type selection, the Geometry.

The Trace tab contains fields for the Calculation expression, and, to build the expression, a Category list, a Quantity list with a Text Filter field, and a list of Functions available for the selected Category. The Range function button opens a dialog in which you can define a range function to apply a function to the expression.

The Category list for the Trace tab includes Variables and Output Variables. An Output Variables button lets you open a dialog to define and edit the Output Variables.

To setup an Optimetrics calculation:

1. Click the Setup Calculations button to open the Add/Edit/Calculation dialog.

2. In the Report Type text field in the Context pane, select from the drop down list of available types.

Selecting Fields as the Report type causes the Geometry field to display.

3. In the Solution text box, select from the drop down list of available solutions.

4. If the Geometry field is available, select from the drop down list.

5. In the Trace tab, specify the solution Category, a Quantity, and Functions. The resulting expression will be displayed in the Value field.

a. Select the Category from the drop down list.

The selection appears in the field, and the Quantity and Function fields list what is available.

b. Select the Quantity from the list.

The selected Quantity appears in the Value field.

If the Quantity list is long, you can filter it for easier selection by typing in the text filter field. Only quantities that contain those alphanumeric characters anywhere in their name will remain visible in the list.

If you want to create an output variable that represents the solution quantity, do the following:

• Click the Output Variables button.

The Output Variables dialog box appears.

• Add the expression you want to evaluate, and then click Done.

The recently created output variable appears in the Quantity list.

• Click a new output variable in the Quantity pull-down list.

Note

The calculation you specify must be able to be evaluated into a single, real number.

The selected Quantity appears in the Value field.

c. Select the Function from the list.

The selected function is applied to the Quantity in the Value field.

6. To apply a Range function to the Calculation expression, see Setting a Range Function.

7. Click Add Calculation to add the expression in the Add/Edit Calculation dialog Value field to the Calculations tab of the Setup Sweep Analysis dialog.

8. Click Done to close the Add/Edit Calculation dialog.

Setting a Range function

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com