淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up a Statistical Analysis >
Specifying a Solution Quantity to Evaluate

Specifying a Solution Quantity to Evaluate

When you add a statistical setup, you can identify one or more solution quantities to evaluate in the Post Analysis Display dialog box. The solution quantities are specified by mathematical expressions that are composed of basic quantities, such as S-parameters; and output variables. When you view the results, Designer displays the distribution of the solution quantities.

1. In the Setup Statistical Analysis dialog box, click the Calculations tab.

2. Click Add.

3. In the Solution text box, click the solution from which the solution quantity will be extracted.

4. In the Calculation text box, specify the solution quantity in one of the following ways:

• If you know the syntax of the mathematical expression or the output variable’s name, type it in the Calculation text box.

• If you want to create an output variable that represents the solution quantity, do the following:

a. Click Edit Calculation.

The Output Variables dialog box appears.

b. Add the expression you want to evaluate, and then click Done.

The most recently created output variable appears in the Calculation text box.

c. To specify a different defined output variable, click the Calculation text box. It becomes a pull-down list that displays all of the defined output variables. Click a new output variable in the pull-down list.

Note

The solution quantity you specify must be able to be evaluated into a single, real number.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com