淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up a Sensitivity Analysis >
Solving a Parametric Setup Before a Sensitivity Analysis

Solving a Parametric Setup Before a Sensitivity Analysis

(Planar EM only)

Solving a parametric setup before a sensitivity setup is useful for guiding Optimetrics in a sensitivity analysis.

To solve a parametric setup before a sensitivity setup:

1. In the Setup Sensitivity Analysis dialog box, click the General tab.

2. Click the parametric setup you want Optimetrics to solve before the sensitivity setup from the Parametric Analysis pull-down list.

Note

The parametric setup must include sweep definitions for the sensitivity variables.

3. Select Solve the parametric sweep before analysis.

If the parametric setup has not yet been solved, Optimetrics will solve it. Optimetrics will use the results (of the solution calculation you requested under the Goals tab of the Setup Sensitivity dialog box) to determine the next design variation to solve for the sensitivity analysis.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com