淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Optimetrics >
Setting up a Sensitivity Analysis >
Setting the Initial Displacement

Setting the Initial Displacement

The initial displacement is the difference in a variable’s starting value and the next solved design variation. During the sensitivity analysis, Optimetrics will not consider an initial variable value that is greater than this step size away from the starting variable value.

1. In the Setup Sensitivity Analysis dialog box, click the Variables tab.

2. Click Advanced.

Optimetrics displays the Initial Displacement column, with default values for each sensitivity variable.

3. In the Initial Displacement text box, type the initial displacement value. Optionally, modify the unit system in the Units text box.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com