淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
 
 

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装

 

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office

          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档:


Nexxim Simulator >
Nexxim Component Models >
Suspended Stripline Elements >
   Selecting None for the Initial Substrate       

Selecting None for the Initial Substrate

For Nexxim designs that are created with the Schematic Editor in Designer, the initial selection of a global substrate type is made from the Choose Layout Technology dialog box that appears when you select Insert Nexxim Circuit Design from the Project menu.

However, no suspended stripline substrates are available in the Choose Layout Technology dialog box.

If you wish to use a suspended stripline substrate, you must create it as a custom substrate type.

In the Choose Layout Technology dialog box, click None. The design opens, but no substrate type will be applied to instances of distributed elements until you create a custom substrate type.

See Creating a Suspended Stripline Substrate for details.




HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


 

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系:mweda@163.com