淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
Nexxim Component Models >
Stripline Elements >
Tee, Reference Planes at Edge

Tee, Reference Planes at Edge

Netlist Format

A tee instance has the following netlist format:

Axxx n1 n2 n3 W1=val W2=val W3=val [NSUM=val]
COMPONENT=tee_edge_referenced SUBSTRATE=substrate_name

n1, n2, and n3 are the names of the nodes attached to the tee. The entry COMPONENT=tee_edge_referenced identifies the element.

The entry SUBSTRATE=substrate_name identifies the stripline substrate model name selected for the design (see Selecting a Stripline Substrate). See the Stripline (SL) Substrate for information on this substrate type.

**Tee Instance Parameters**
Parameter	Description	Unit	Default
W1	Width of line connected to node n1	Meter	1e-3
W2	Width of line connected to node n2	Meter	1e-3
W3	Width of line connected to node n3	Meter	1e-3
NSUM	Number of modes considered in the field expansion	None	3

Netlist Example

A23 Port1 Port2 Port3 W1=1e-3 W2=2e-3 W3=3e-3
+ COMPONENT=tee_edge_referenced SUBSTRATE=SL1

where SL1, the selected layout technology or substrate type, has a definition such as:

.SUB SL1 SL( B=0.001524 Er=4.40000000000000
+ TAND=0.0200000000000000 MET1=1.72413793103448
+ T1=1.7145e-005 RGH=0mil)

Notes

1. [All substrates] The collinear lines are connected to nodes n1 and n2 and have widths W1 and W2; the perpendicular line is connected to node n3 and has width W3.

2. [All substrates] If W1 > W2: Node n3 is collinear with W1.

3. [All substrates] If W2 > W1: Node n3 is collinear with W2.

4. [Stripline] To get accurate results, the following condition should be satisfied: B/l_g<< 1, where l_g is the guide wavelength in the substrate dielectric.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com