 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 淘宝官方店 推荐课程 在线工具 联系方式 关于我们 |
|
|
微波射频仿真设计 |
|
| 首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档 |
|
Nexxim Simulator > Resistor
 Resistor Instance Netlist SyntaxThis basic resistor is available within the Designer Schematic Editor. The basic resistor has only the resistance (R) parameter, and does not have a corresponding resistor model. Netlist versions should use the Resistor Device instance. The form for the basic resistor instance is: Rxxxx n1 n2 [[R=]val] [NOISE=0|1] [DTEMP=val] n1 is the positive node and n2 is the negative node of the resistor. The resistance defaults to 50 Ohms in Designer schematics. In a netlist, the default resistance is calculated. Optionally, set NOISE=1 to generate noise data. Optionally, set DTEMP to the difference between the device temperature and the circuit temperature.
HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程 |
|
Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com |
|
Ansoft Designer / Ansys Designer 在线帮助文档：
