NXESR — Ansoft Designer 7.0 在线帮助文档，Ansys Designer 教程

淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

ESR SourceNetlist Format

An Eye External Step Response source is inserted in a schematic to allow the user to specify the rising and falling step responses for QuickEye and VerifEye via data files. The netlist syntax is:

AESRxxxx COMPONENT=external_step_response
+ SOURCE_NAME='Eye Source'
+ PROBE_NAME='Eye Probe'
+ STEP_RESPONSE_FILE_RISE='file-reference'
+ STEP_RESPONSE_FILE_FALL='file-reference'

The ESR does not connect physically to the circuit. The ESR represents one set of step responses between one source and one probe, which must be specified. At least one of the step response files must be specified. If only one file is specified, symmetry is assumed. The data files use a two-column format: time voltage. Linear interpolation is used betwen timepoints. The entry COMPONENT=external_step_response identifies the component.

**ESR Source Parameters**
Parameter	Description	Unit	Default
SOURCE_NAME	Name of the Eye Source for this ESR	None	Required
PROBE_NAME	Name of the Eye Probe for this ESR	None	Required
STEP_RESPONSE_FILE_RISE	Name of the file with the rise time step response	None	None
STEP_RESPONSE_FILE_FALL	Name of the file with the fall time step response	None	None

ESR Source Netlist Example

AESR3 COMPONENT=external_step_response
+ SOURCE_NAME='EYE_Source1'
+ PPROBE_NAME='EYE_Probe1'
+ STEP_RESPONSE_FILE_RISE='rising_SR.txt'
+ STEP_RESPONSE_FILE_FALL='falling_SR.txt'


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com

Eye External Step Response (ESR) Source

ESR SourceNetlist Format

ESR Source Netlist Example