淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Nexxim Simulator >
VerifEye and QuickEye Analyses >
Running QuickEye Analysis from the Schematic Editor

Running QuickEye Analysis from the Schematic Editor

To run QuickEye analysis, the design must include one or more Eye Sources and corresponding Eye Probes. Channel parameters including equalization are set up in the sourcs and probes. Other parameters can be specified in the setup dialog. Topics in this section are:

Add a QuickEye Source to the Schematic

Add a QuickEye Probe to the Schematic

Add an External Step Response for QuickEye

Set Up the QuickEye Analysis

Run the QuickEye Analysis and Display Results

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com