Voids in Layout

淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
Voids in Layout

For both copy/paste and copy to Planar EM, if a void’s owner is selected, all of its voids are copied and pasted as voids. Any voids that are not wanted can then be deleted after the paste.

If a void is selected but its owner is not, the void is copied as a primitive. If desired, the boolean subtract functionality can be used to notch or add a void, based on the overlap between the primitive and another selected primitive.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com