Uniting Objects

淘宝官方店推荐课程在线工具联系方式关于我们

	微波射频仿真设计 Ansoft Designer 中文培训教程 \| HFSS视频培训教程套装
	Agilent ADS 视频培训教程 \| CST微波工作室视频教程 \| AWR Microwave Office

首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档

Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Modifying Objects >
Uniting Objects

To join two or more objects into one object, use the Layout > Merge Polygons > Union command. The new object has the name, color, boundary, and material assignment of the first object selected. The objects are united at the point of intersection.

1. Select the objects you want to join.

2. On the Layout menu, point to Merge Polygons, and then click Union.

The objects are united.

Union and Intersection operations support using selected objects on multiple layers, and each layer object is operated on separately. However, Subtraction is only allowed if the selected objects are on the same layer. Selected objects may be negative objects.

• If only negative objects are selected, the merge operation is performed the same as with positive objects, but the resulting objects remain negative objects.

• If both negative objects and positive objects are selected:

— Perform the union/intersection/subtraction operation on the positive objects

— Always union the negative objects

— Subtract the negative object result from the positive object result

Note

By default, the objects being joined to the first object selected are not preserved for later use. If you want to keep a copy of the objects being joined to the first object selected, do the following:

• Copy the objects, and then paste them back into the design after uniting them.

HFSS视频教程 ADS视频教程 CST视频教程 Ansoft Designer 中文教程


Copyright © 2006 - 2013 微波EDA网, All Rights Reserved 业务联系：mweda@163.com