淘宝官方店     推荐课程     在线工具     联系方式     关于我们  
　
　

微波射频仿真设计   Ansoft Designer 中文培训教程   |   HFSS视频培训教程套装
　

Agilent ADS 视频培训教程   |   CST微波工作室视频教程   |   AWR Microwave Office
          首页 >> Ansoft Designer >> Ansoft Designer在线帮助文档


Ansoft Designer / Ansys Designer 在线帮助文档：

Layout Editor User Guide >
Drawing a Model >
   Routing Traces >
       Unfix Auto-Trace           


Unfix Auto-Trace

Trace geometry that is placed as a manual trace segment, or modified since the original auto-routing, is "fixed" in place. After part of a trace is fixed, additional modifications to the trace start/end causes traces to be rerouted to the newly fixed geometry — the fixed geometry does not move.

To "unfix" these portions of the trace and allow them to be automatically rerouted, select the fixed geometries to be rerouted and select Traces > Unfix from the Draw menu. All the selected portions of the trace, along with all other non-fixed segments of the trace, will be replaced with new auto-routed trace segments.

 



HFSS视频教学培训教程 ADS2011视频培训教程 CST微波工作室教程 Ansoft Designer 教程

                HFSS视频教程                                      ADS视频教程                               CST视频教程                           Ansoft Designer 中文教程


　

      Copyright © 2006 - 2013   微波EDA网, All Rights Reserved    业务联系：mweda@163.com